Showing posts with label 6x3 EMP prop. Show all posts
Showing posts with label 6x3 EMP prop. Show all posts

Saturday, March 16, 2019

Ground Control RC F-22 Mini V3 build log Part 1 - Intro

Hi Everyone -

Welcome to my build log series of the Ground Control RC (GCRC) F-22 Mini V3.😊
Here is some flight video of this little steed in action😎
As I mention in the video, this plane is build with Dollar Tree foam (also known as Adams Readiboard) but could with the necessary adjustments to the slots on the plans be built with just about any foam you have available.  You can see much more information about this awesome little park jet at GCRC's You Tube channel and his Patreon site.  

Here are the basic dimensions of this park jet.

Wingspan - 22"/559 mm Length - 28.75"/730 mm Height - 4.75"/120.7 mm

In the video, my AUW with a 1050 Mah 3S 75C battery is 326 gr/11.5 oz.

Between us to this point, GCRC and I have accumulated well over 200 test flights with this plane with different props, motors, ESCs, batteries, KF (Kline Fogleman) airfoil combinations. Therefore it is a very well tested and evaluated park jet right from the plans through to the finished flying product😊

In the video, my plane is equipped with the following inexpensive components.



ESC - Turnigy Plush 30A with built in 2A/5V BEC (good for up to 6 servos)

Battery - Tattu 1050 3S 75C; and


Servos - Two (elevons only) GOTECK GS-9018C 9 gr nylon gear servos.

This is a very agile and fast park jet with the current setup and I would say is in the intermediate category, so I would not recommend it as a beginner/trainer park jet.  However, if you check out GCRC's You Tube channel and Patreon site, he has some better options if you are just getting started in the hobby or park jets.😊

Next up, part 2, cutting out the parts.

Cheers,

Scott

#ParkJetnoise
#ParkJetpilot
#GCRCF22MiniV3

Tuesday, May 1, 2018

Tattu R-Line 1550 4S 75C batteries initial impressions and testing

Hi Everyone -

I received a couple of Tattu R-Line 1550 4S 75C batteries in the mail a couple days ago to experiment with some serious speed in my park jets😀

These batteries have a very good reputation from what I have read and watched on YouTube, they were not cheap, but I only bought a couple for some experimentation and serious speed fun!

I went with this small size as I didn't want to pay a big weight penalty, so even though my flights will be short, they should be fast😉  The batteries weigh 186 gr/6.6 oz.  The normal 2200 3S batteries I use weigh 192 gr/6.8 oz, so my planes should still be pretty light to help them be fast. 
I already did some quick testing for a modified RC Powers Su-30 V4 I am building specifically for speed.  Here is a short video I shot discussing this testing.  You can watch more about this special build by going to this playlist on my YouTube channel.
As discussed in the video, the only successful test was with the EMAX RS2306 2750 kv motor using the 6x3 EMP prop and the HobbyWing Platinum PRO 40A ESC with custom settings of 26.25 degrees timing and 8 KHz PWM frequency.  You can see the full details on my motor test spreadsheet, but here are the numbers for the combo I mentioned with this new Tattu 4S battery.

50% throttle - 21.8A/346.5W producing 940 gr/33.2 oz of thrust;

100% throttle - 54.8A/860.2W producing 1630 gr/57.5 oz of thrust.

WOW!  That is a 45% increase in thrust over the best mid range power on 3S and 36% increase at full throttle!😲

Until my 5" props that I have ordered show up, this is the setup I will experiment with.

Here are the 5" props I have ordered based on watching rcplanepirate's video on his testing of the EMAX RS2306 2750 kv motor and his personal recommendations. I pasted this list in from the comments of this video.
Hobby King
HobbyKing 5040 GRP/nylon prop https://hobbyking.com/en_us/glass-fib... Dalprops "Indestructible" Bull Nose 5045 V2 https://hobbyking.com/en_us/dalprop-5... Diatone Bull Nose Plastic Propellers 5 x 4.5 https://hobbyking.com/en_us/diatone-b... Banggood DALPROP 5045 Bullnose PC Propeller https://www.banggood.com/2-Pairs-DALP... Gemfan 5045 5 Inch Propeller Bullnose https://www.banggood.com/4PCS-Bullnos... KINGKONG/LDARC 5040 Propellers https://www.banggood.com/10-Pairs-KIN...

So I am excited to get to the field and start experimenting with these new batteries and this setup in a plane, it is going to be scary fast!😳

Park Jet noise...the "other" sound of freedom😎

Cheers,

Scott



Thursday, April 19, 2018

Initial post flight report GepRC GR2306 2750 kv motor

Hi Everyone -

Just back from the field blasting 12 flights through my new GepRC GR2306 2750 Kv motor😀  You can read more about my initial impressions and bench testing of this motor at this blog post.

From what I saw today, this motor paired with the 6x3 EMP prop using the Turnigy AE-45A ESC with custom settings of 22.5 degrees on the timing and 24 KHz PWM frequency is the new "king" of the quad racing motors I have tested thus far in my park jets.👍

Here is some video of one of today's flights.  It definitely has much more power mid range, I had to be careful with how much I advanced the throttle when launching or it would want to rip it out of my hand!😲  Normally with most motor setups I launch at around 60% throttle, with this motor I had to back that off to about 50% throttle to feel like I could still hang on to the plane.

I also flew the EMAX RS2306 2750 kv motor with the 6x3 EMP prop today and overall, the GepRC has more mid range power and top end speed.  Not as noticeable an increase in top end speed, but definitely at mid range between about 50-75% throttle.  In fact, I would estimate I would be able to reduce the throws down a bit more the plane moves along so fast at mid range, just so I could keep up with the plane.😊

I pushed it hard for 12 flights and it ran smooth and strong the whole time, no hesitation no matter how hard I slammed the throttle around.  Although it was a cool day, temps got up to about 12 C/54 F, the motor and ESC ran very cool, barely any noticeable heat build up at all, so I think even in warmer weather, this setup would run just fine.

Very impressed with this motor and it's performance today, I may have to order another one to have a couple of serious speed setups😉

Park Jet noise...the "other" sound of freedom😎

Cheers,

Scott

Monday, April 16, 2018

Bench test session with 2700 Kv plus motors and 6x3 EMP/TGS/KMP prop

Hi Everyone -

I recently completed a fairly significant test session going back through all the quad racing motors I have been testing that are 2700 Kv or higher and testing them with the 6x3 EMP prop.  If you click on this previous link, it will take you to the RC Timer site, these props are also available under different names TGS from Hobby King and KMP from Banggood.  I normally buy mine from RC Timer as although you have to buy them in bundles of five, they are much cheaper.

I had wanted to do this for awhile, and was finally pushed to get it done after recently bench and field testing the Hawksky AT2306 II 2750 kv motor.  You can read more about this motor, my initial impressions and bench testing at this blog post.  Here is some flight video I shot with this prop and motor.
Here is the list of 2700 and over Kv motors I tested on the bench recently.

All of the motors except the Brother Hobby 2800 showed marked improvement in thrust while doing so more efficiently compared to the 6x4 APC gas prop.  The Brother Hobby motor performed worse with the 6x3 prop.  I suspect due to it's smaller size stator, it needs the 6x4 prop to really push the motor to better levels of performance.  You can read the full details of all the test numbers on the motor test spreadsheet.  

The EMAX RS2306 2750 Kv motor continues to be a very good performer and actually with this prop preferred the Turnigy AE-45A ESC with custom settings of 22.5 degrees and 24 KHz PWM frequency over the more expensive HobbyWing Platinum PRO 40A ESC that it preferred with the 6x4 APC gas prop.  All of these results are on 3S.  The EMAX motor still has the best 50% throttle performance although it did not increase significantly over the 6x4 APC gas prop.  It had a significant increase of 125 gr of thrust at full throttle with the 6x3 prop.

EMAX RS2306 2750 Kv motor with 6x3 EMP prop, Turnigy AE-45A ESC on 3S

50% throttle - 16.4A/197.5W producing 650 gr/22.9 oz of thrust;

100% throttle - 36.5A/416.3W producing 1200 gr/42.3 oz of thrust.

The pleasant surprise is the very inexpensive Racerstar BR2306S 2700 Kv motor.  It showed a 20 gr improvement in mid range thrust and 115 gr at full throttle.  I will keep an eye on it as it is pulling 37.1A at full throttle which might be a bit more than it is designed to handle, but anytime I see anything close to 1100 gr of thrust it makes me take notice😀

Racerstar BR2306S 2700 Kv motor with 6x3 EMP prop, Turnigy AE-45A ESC on 3S

50% throttle - 12.3A/153.8W producing 525 gr/18.5 oz of thrust;

100% throttle - 37.1A/459.8W producing 1080 gr/38.1 oz of thrust.

The real star of the show is the SunnySky Edge R2305 2800 kv motor showing a 50 gr increase in thrust at mid range and a whopping 185 gr increase in thrust at full throttle while drawing 5 less amps than it did with the 6x4 APC gas prop😲  It produces the most thrust at full throttle by 50 gr compared to the EMAX motor.

SunnySky Edge R2305 2800 Kv motor with 6x3 EMP prop, Turnigy AE-45A ESC on 3S

50% throttle - 14.2A/172.5W producing 615 gr/21.7 oz of thrust;

100% throttle - 40A/456.8W producing 1250 gr/44.1 oz of thrust.

So I am excited now to do some more field testing, first up will be the SunnySky Edge motor, it ripped with the 6x4 APC gas prop, so if the thrust is that much better with the 6x3 EMP, it should move along pretty smartly😉

Park Jet noise...the "other" sound of freedom😎

Cheers,

Scott

Wednesday, April 11, 2018

Initial impressions and bench testing of the Hawksky AT2306 II 2750 Kv motor

Hi Everyone -

I received my Hawksky AT2306 II 2750 Kv motor in the mail today😀  I picked mine up from Banggood, $22.37 USD, took about 4 weeks to get here with free shipping.
It comes complete with 4 mounting bolts that you would use to mount in on a quad or anything I suppose as well as one prop nut, no bullet connectors as you can see above.  It is pretty light, the motor wires are 90 mm long and with no hardware, the motor weighs 30 gr/1.1 oz.
It has a "naked bottom", so no actual full base plate.  Bolt pattern is 16x19 mm, so the same as a standard "X" mount for use in a park jet.
The Banggood website has very little info on the magnets, etc, they do look curved, a pretty tight tolerance between the magnets and stator.  The bell spins freely, but I can feel that the magnets are pretty strong.  Not sure how many windings it has, the wire is quite thick compared to some other motors of this size I have tested.  As you can see, to remove the shaft, there is a small hex bolt rather than a "C" clip, although it does not come with spare bolt like some other motors I have tested.

The outside of the bell has very small ridges, I am not sure if this is to help with motor cooling.  It is available in green like the base is shown above or all silver like I went for and is also available in 2500 Kv (same price though😉)
With the prop and all other hardware it weighs 44 gr/1.6 oz which is pretty light, about the lightest motor of this size I have tested by about 4 gr.
Bench testing

You can go straight to the motor test spreadsheet for the full details if you would like, I'll touch on some highlights below.  I tested it initially with the 6x4 APC gas prop and the full throttle amp draw was quite high ranging from 43.9 to 47.7A depending on the ESC and the thrust numbers were a bit disappointing compared to other motors of the same size and Kv.  I probably would not fly with the 6x4 APC gas prop as the amp draw would be pushing the ESCs past their base rated limit in all three cases.

So I decided to "prop down" and ran the same tests with the 6x3 EMP prop from RC Timer.  Here are the best numbers using the Turnigy AE-45A ESC with custom settings of 22.5 degrees timing and 24 KHz PWM frequency using a Gens Ace 2200 3S 45C battery.

50% throttle - 17.6A/217.5W producing 646 gr/22.8 oz of thrust;

100% throttle - 42.3A/485.1W producing 1215 gr/42.9 oz of thrust.

So for initial field testing, I will use the 6x3 EMP prop and the Turnigy Plush 40A ESC for consistency.  Even with the Turnigy Plush on default settings the results were quite good with the 6x3 EMP prop.

50% throttle - 17.3A/211.5W producing 624 gr/22 oz of thrust;

100% throttle - 39.7A/451.6W producing 1155 gr/40.7 oz of thrust.

As I continue to fill out my spreadsheet, I will go back and test several of the other 2700+ Kv props with the 6x3 EMP prop to see the results.

Park Jet noise...the "other" sound of freedom 😎

Cheers,

Scott





Saturday, March 17, 2018

Field test - 2212/5T 2700 Kv motor with 6x3 EMP and 6x4 APC electric props on 3S

Hi Everyone -

I had this beauty out yesterday doing some field testing to validate some bench testing I did a few days ago😊
You can read more details about that testing and my previous experiences with this motor at this blog post.  

Here is the flight video of yesterday's testing.

One of the reasons I did this testing with the Turnigy AE-45A ESC is to evaluate this as an inexpensive power upgrade to the 2212/6 2200 kv motor which is a good starter setup.  Of all the ESCs I have tested in a while, the Turnigy AE-45 is one of the most reasonably priced, versatile and top performing ESCs I have used.  Regularly priced at $21.39 USD, it is a couple of dollars cheaper than the Turnigy Plush 40A ESC and almost half the price of the HobbyWing Platinum PRO 40A ESC that I have also been testing.  To get the best performance with the Turnigy AE-45A ESC, I found setting the timing to 22.5 degrees and the PWM frequency to 24 KHz is optimum for this motor.

As I mentioned in the video, I have also flown this motor with the 6x4 APC gas prop with very good results using the Plush ESC, however the results on the bench were not so good with the Turnigy AE-45.  In keeping with trying to come up with a "budget" setup, I won't discuss that setup as the 6x4 APC gas prop is quite a bit more expensive than the two props I tested in the video and I know some folks can't get it in their part of the world.

The 6x3E sport prop I used in the video is from RC Timer and although you have to buy them in packs of 5 props, it works out to about $0.90 USD per prop.  At Hobby King, the 6x3 TGS prop is $1.61 and at Banggood, the 6x3 KMP prop is $1.64.  The 6x4 APC style electric props from Hobby King used in the video sell for $1.22 a pair or $0.61 each.

So affirmed in the video is yes, you can run a 6x4 prop on this motor, but the quality of the motor will determine how long you can run it with that prop.  As mentioned in the bench test post linked above and the flight video, from my experience, I would say that about 300 flights might be the maximum unless you get lucky and get a really good motor😀  Bearings will most likely be the first thing that goes on these motors as the manufacturers tend to "cheap out" on these to save production cost.

Even with the 6x3E prop, there is a power increase noticeable over the 2212 2200 kv motor with it's best setup.  Especially noticeable is the mid range power and "hole shot" acceleration, so I think it is still a noticeable power upgrade over the 2212 2200 kv motor and the price can be pretty reasonable.

I didn't mention in the bench test video, but you will need to provide your own connectors to be able to connect it to the ESC as it does not come with them.  Also, the prop adapters can be of very cheap quality and can bend easily, so I would suggest picking up some extras.  I get mine from RC Timer, they have worked well for me for a few years now.  I would suggest having a few of these spare for any motors you run with a 3.17 mm shaft as once they bend, they are very hard to get straight again and can sometimes shear off if you try to tighten the prop too hard.😒

If you are interested in more testing on this motor, please check out rcplanepirate's YouTube channel.  He did three videos experimenting with this motor on the bench.  If you do buy the 6x3E sport prop or it's equivalents from TGS or KMP, be aware they are normally not balanced, RCPP also has a great video on how to balance these props for best performance.  As mentioned in my video, here is RCPP's prop discussion video which I find quite informative.
So in conclusion, yes this motor is a budget power upgrade over the 2212 2200 kv motor and can be run on a 6x4 APC prop, however I would suggest not setting your expectations for quality control and longevity too high if you do decide to run the 6x4 prop😊  The 6x3E would probably be the best choice for motor longevity in this case.  You get what you pay for in this situation, and your experiences may differ from mine, fingers crossed you get some good ones😉

Park Jet noise...the "other" sound of freedom😎

Cheers,

Scott

Wednesday, March 14, 2018

A2212/5T 2700 Kv motor budget power upgrade or buyer beware?

Hi Everyone -

I had the thrust stand busy yesterday doing some more testing with the inexpensive A2212/5T 2700 Kv motor with the 6x3E sport prop from RC Timer and the Turnigy AE-45A ESC.
I am doing some more testing with this motor and setup as a possible inexpensive power upgrade from the 2212/6 2200 Kv motor for those folks who don't perhaps want to play around with quad racing motors that can get a bit more pricey and amp hungry.

I will get to the specifics of the testing towards the end, or if you don't want to wait, you can check out my motor test spreadsheet here.  Please scroll along the bottom to find the tab for this motor, it is over to the right of the spreadsheet.😀  Also, if you watch rcplanepirate's YouTube channel, he has done all kinds of testing and has shot three videos on testing one of these motors he bought from EBay.

I have run these motors in several different planes for a couple of years now and certainly you get what you pay for, but I have had some pretty good performance from most of the ones I bought and have run them pretty hard on 6x4 APC electric props (knock offs from Hobby King) and the 6x4 APC gas prop.  If you pick a couple up, my advice would be to be prepared that your motors might not last terribly long depending on how you run them, quality control is not a big strength of motors that you can get for $5-7 USD😏

The link above for this motor is from GearBest, I have also purchased them from a couple of different vendors from EBay.  GearBest just raised the price to $7.01 USD which is the price at the time of writing this post.  There are several vendors on EBay that sell this motor, I just found this one that sells the motor for $5.16 USD.

The worst experience I have had with this motor were two that I bought from Banggood over a year ago.  The two motors I got from Banggood were not usable, even with a 6x3 prop, they both pulled over 40A and ran exceptionally hot.   Here is the link to the Banggood motor, they want $7.59 USD for their version😕

In all honesty, it is very difficult to know the amp limits on this motor.  Reading specs from this vendor on EBay, they give it a very low amp rating.  Here are their specs copied and pasted in.

Model No.: A2212/5T 2700KV
Weight: 50g
Motor Dimensions: 27.7 * 26.3mm
Shaft Size: 3.17 * 37mm
Battery Operating: 2-3 LiPo
Idle Current: 1.8A
Load Current: 18.5A
Power (Watt): 240
ESC (A): 30A. 20A
Ri (MΩ): 0.14
Peak Amps: 14-22 A

I have a bit of a hard time believing this motor is rated that low, unless it was run on 2S or with a very small, low pitch prop on 3S where you would get very limited thrust.  I think I have also read somewhere it is a 25A motor, again I think a bit low.  However, all of the motors I have run do run warmer/hotter than other higher quality motors.  One of the areas that most manufacturers will "cheap out" on is the bearings which can cause the motor to work harder and rather than producing more power, the motor produces heat.

Here are some comparison pictures.  The motor on the left was run for almost 300 flights using the 6x4 APC electric prop.  This motor was consistently pulling 35A on a static test.  It has now pretty much reached the end of it's productive life as the bearings are starting to go😢  Hopefully you can see that the top has become discolored, much lighter than the new one on the right.
In the next two pictures, I tried to get shots of the wires, the wires on the used motor are darker indicating they have had some pretty high temps running through them.  The new one of course has very nice, shiny wires.

Another thing to look for when a motor is starting to run rough or the bearings are going is to pull gently on the bell of the motor, looking for a gap where my thumb is pointing below.  In the old motor, I can pull the bell so that this gap is about 1mm, on the new motor, the bell barely moves.
So to answer the question, can you run this motor on a 6x4 prop?  Yes, you can, but you need to be aware that you are probably pushing the motor pretty hard and depending on whether you got a good motor or a bad motor will determine it's longevity.  I suppose 300 flights from a $5 motor is not a bad result (about $.02 per flight😉), I have certainly had more expensive motors last less time than that😒

I did run this motor with the 6x3E sport prop in the past, also available from HobbyKing as 6x3 TGS and Banggood as 6x3 KMP and it ran very well, I just preferred at the time the feel and performance of the 6x4 APCE prop.  So now that I have an actual thrust stand that is far more accurate than my previous crude setup, I decided to do some more bench test comparison.  The results were actually quite good.  I first tested with the Turnigy Plush 40A ESC with timing at low as this is the ESC I have been using all along when flying with this motor.  Here are the results with the 6x3E sport prop.

50% throttle - 13.1A/158.8W producing 540 gr/19 oz of thrust;

100% throttle - 28.2A/328.1W producing 995 gr/35.1 oz of thrust.

So these results are quite good and very efficient for that much power.  Compared to the best setup I have found with the 2212/6 2200 kv motor, it is about 80 gr more thrust at mid throttle and 45 gr more at full throttle, so certainly a boost in power, especially at mid range.

So since I have been seeing such great results with the Turnigy AE-45A ESC with custom settings of 22.5 degrees timing and 24 KHz PWM frequency, I gave that a try as well with three different props.  Here are the results.

6x3E sport prop

50% throttle - 14.8A/182.2W producing 586 gr/20.7 oz of thrust;

100% throttle - 30.2A/348.3W producing 1045 gr/36.9 oz of thrust.

6x4 APCE (Hobby King knockoff)

50% throttle - 14.3A/173.0W producing 530 gr/18.7 oz of thrust;

100% throttle - 34A/395.5 producing 1010 gr/35.6 oz of thrust.

6x4 APC gas

50% throttle - 14.6A/176.2W producing 555 gr/19.6 oz of thrust;

100% throttle - 36.5A/402.3W producing 920 gr/32.5 oz of thrust.

So I was quite surprised at how low the top end thrust was with the 6x4 APC gas prop considering it is better than that with the Turnigy Plush on factory default although the AE-45 does give slightly better results at mid throttle.

I was quite impressed with the thrust and efficiency with the 6x3E sport prop with the AE-45 ESC, so I will have to give that a try at the field and compare it to the 6x4 APCE since if I am trying to find a "budget" power upgrade, these props are much less expensive and available than the 6x4 APC gas prop.

So next up some field testing with this motor, the AE-45A ESC and the 6x3E sport and 6x4 APCE props😀

Park Jet noise...the "other" sound of freedom😎

Cheers,

Scott